By Evil Matter
First start a new image in Grayscale Mode, and make the contents Transparent.
First fill Layer 1 in with Black then you need to select the Type Tool, and type your text. Then you need to go to Layer > Type > Render Layer, and position the text to the lower end of the image. Now Flatten your image: Layer > Flatten Image
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o0u.gif)
Now you need to rotate the image 90
degrees counter clockwise: Image > Rotate Canvas > 90 CCW
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o1u.gif)
Then Invert the image: Image > Adjust > Invert
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o2u.gif)
Now apply the wind filter: Filter > Stylize > Wind Then set the wind's direction to from
the left. Next you invert the image once again: Image > Adjust > Invert.
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o3u.gif)
Next you have to apply the Wind Filter
two times. You can do like below or you can just push (Ctrl + F) two times. Filter > Stylize > Wind and again: Filter > Stylize > Wind.
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o4u.gif)
Then Rotate the image clockwise now. Image > Rotate Canvas > 90 CW
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o5u.gif)
Now apply another filter the distort filter. Filter > Distort > Ripple Set the Amount to somewhere 50-70.
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o6u.gif)
Now for the finish touches. Image > Mode > Indexed Color Now go to Image > Mode > Color Table, and set table to Black Body instead of Grayscale.
![](http://www.tutorialspalace.com/wp-content/uploads/2009/11/29o7u.gif)
thank you
ReplyDelete